Dr.-Ing. Oliver Wallscheid

G. Book, A. Traue, P. Balakrishna, A. Brosch, M. Schenke, S. Hanke, W. Kirchgässner, O. Wallscheid, IEEE Open Journal of Power Electronics (2021), pp. 187-201

DOI

Safe Bayesian Optimization for Data-Driven Power Electronics Control Design in Microgrids: From Simulations to Real-World Experiments

D. Weber, S. Heid, H. Bode, J. Lange, E. Hüllermeier, O. Wallscheid, IEEE Access (2021), 9, pp. 35654–35669

DOI

Accurate Torque Control for Induction Motors by Utilizing a Globally Optimized Flux Observer

M. Stender, O. Wallscheid, J. Böcker, IEEE Transactions on Power Electronics (2021), 36(11), pp. 13261-13274

DOI

Accurate Torque Estimation for Induction Motors by Utilizing a Hybrid Machine Learning Approach

M. Stender, O. Wallscheid, J. Böcker, in: 2021 IEEE 19th International Power Electronics and Motion Control Conference (PEMC), IEEE, 2021

DOI

Combined Electrical-Thermal Gray-Box Model and Parameter Identification of an Induction Motor

M. Stender, O. Wallscheid, J. Böcker, in: IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society, IEEE, 2021

DOI

Gray-Box Loss Model for Induction Motor Drives

M. Stender, O. Wallscheid, J. Böcker, in: 2021 IEEE 19th International Power Electronics and Motion Control Conference (PEMC), IEEE, 2021

DOI

Comparison of Artificial Neural Network and Least Squares Prediction Models for Finite-Control-Set Model Predictive Control of a Permanent Magnet Synchronous Motor

S. Hanke, O. Wallscheid, J. Böcker, IET Digital Library, 2021

DOI

Thermal Monitoring of Electric Motors: State-of-the-Art Review and Future Challenges

O. Wallscheid, IEEE Open Journal of Industry Applications (2021)

Data-Driven Permanent Magnet Temperature Estimation in Synchronous Motors with Supervised Machine Learning: A Benchmark

W. Kirchgässner, O. Wallscheid, J. Böcker, IEEE Transactions on Energy Conversion (2021), 36(3), pp. 2059 - 2067

DOI

gym-electric-motor (GEM): A Python toolbox for the simulation of electric drive systems

P. Balakrishna, G. Book, W. Kirchgässner, M. Schenke, A. Traue, O. Wallscheid, Journal of Open Source Software (2021), 2498

DOI

A Deep Q-Learning Direct Torque Controller for Permanent Magnet Synchronous Motors

M. Schenke, O. Wallscheid, IEEE Open Journal of the Industrial Electronics Society (2021), pp. 388-400

DOI

Improved Exploring Starts by Kernel Density Estimation-Based State-Space Coverage Acceleration in Reinforcement Learning

M. Schenke, O. Wallscheid, arXiv preprint arXiv:2105.08990 (2021)

Thermal Neural Networks: Lumped-Parameter Thermal Modeling With State-Space Machine Learning

W. Kirchgässner, O. Wallscheid, J. Böcker, arXiv preprint arXiv:2103.16323 (2021)

Torque and Inductances Estimation for Finite Model Predictive Control of Highly Utilized Permanent Magnet Synchronous Motors

A. Brosch, O. Wallscheid, J. Böcker, IEEE Transactions on Industrial Informatics (2021)

DOI

2020

Toward a Reinforcement Learning Environment Toolbox for Intelligent Electric Motor Control

A. Traue, G. Book, W. Kirchgässner, O. Wallscheid, IEEE Transactions on Neural Networks and Learning Systems (2020), pp. 1-10

DOI

Estimating Electric Motor Temperatures with Deep Residual Machine Learning

W. Kirchgässner, O. Wallscheid, J. Böcker, IEEE Transactions on Power Electronics (2020), 36(7), pp. 7480-7488

DOI

Data-Driven Recursive Least Squares Estimation for Model Predictive Current Control of Permanent Magnet Synchronous Motors

A. Brosch, S. Hanke, O. Wallscheid, J. Böcker, IEEE Transactions on Power Electronics (2020), pp. 2179-2190

DOI

Emulation of Microgrids for Research and Validation of Control and Operation Strategies

K.S.C. Stille, D. Weber, J. Lange, T. Vogt, O. Wallscheid, J. Böcker, in: 2020 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), IEEE, 2020

DOI

Comparison of Gray-Box and Black-Box Two-Level Three-Phase Inverter Models for Electrical Drives

M. Stender, O. Wallscheid, J. Böcker, IEEE Transactions on Industrial Electronics (2020), 68(9), pp. 8646-8656

DOI

Accurate Torque Estimation for Induction Motors by Utilizing Globally Optimized Flux Observers

M. Stender, O. Wallscheid, J. Böcker, in: 2020 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), IEEE, 2020

DOI

OMG: A scalable and flexible simulation and testing environment toolbox for intelligent microgrid control

S. Heid, D. Weber, H. Bode, E. Hüllermeier, O. Wallscheid, Journal of Open Source Software (2020), 5(54), pp. 2435

Towards a scalable and flexible simulation and testing environment toolbox for intelligent microgrid control

H. Bode, S. Heid, D. Weber, E. Hüllermeier, O. Wallscheid, arXiv preprint arXiv:2005.04869 (2020)

Permanent magnet synchronous machine temperature estimation using low-order lumped-parameter thermal network with extended iron loss model

E.G. Gedlu, O. Wallscheid, J. Böcker, in: The 10th International Conference on Power Electronics, Machines and Drives (PEMD 2020), 2020, pp. 937–942

Investigation of disturbance observers for model predictive current control in electric drives

O. Wallscheid, E.F.B. Ngoumtsa, IEEE Transactions on Power Electronics (2020), 35(12), pp. 13563–13572

Data Set Description: Identifying the Physics Behind an Electric Motor–Data-Driven Learning of the Electrical Behavior (Part II)

S. Hanke, O. Wallscheid, J. Böcker, arXiv preprint arXiv:2003.06268 (2020)

Data-Driven Permanent Magnet Temperature Estimation in Synchronous Motors with Supervised Machine Learning

W. Kirchgässner, O. Wallscheid, J. Böcker, arXiv preprint arXiv:2001.06246 (2020)

Data set description: Three-phase IGBT two-level inverter for electrical drives

M. Stender, O. Wallscheid, J. Böcker, 2020

2019

Controller Design for Electrical Drives by Deep Reinforcement Learning: A Proof of Concept

M. Schenke, W. Kirchgässner, O. Wallscheid, IEEE Transactions on Industrial Informatics (2019), pp. 4650-4658

DOI

Empirical Evaluation of Exponentially Weighted Moving Averages for Simple Linear Thermal Modeling of Permanent Magnet Synchronous Machines

W. Kirchgässner, O. Wallscheid, J. Böcker, in: 2019 IEEE 28th International Symposium on Industrial Electronics (ISIE), 2019

DOI

Deep Residual Convolutional and Recurrent Neural Networks for Temperature Estimation in Permanent Magnet Synchronous Motors

W. Kirchgässner, O. Wallscheid, J. Böcker, in: 2019 IEEE International Electric Machines & Drives Conference (IEMDC), 2019

DOI

Development of a Black-Box Two-Level IGBT Three-Phase Inverter Compensation Scheme for Electrical Drives

M. Stender, O. Wallscheid, J. Böcker, in: 2019 IEEE 28th International Symposium on Industrial Electronics (ISIE), IEEE, 2019

DOI

Finite-control-set model predictive control for a permanent magnet synchronous motor application with online least squares system identification

S. Hanke, S. Peitz, O. Wallscheid, J. Böcker, M. Dellnitz, in: 2019 IEEE International Symposium on Predictive Control of Electrical Drives and Power Electronics (PRECEDE), 2019, pp. 1–6

Stator flux-based field-oriented position-sensorless control of permanent magnet synchronous motors with limited parameter knowledge

O. Wallscheid, M.S. Shafiq, J. Böcker, in: 2019 IEEE 28th International Symposium on Industrial Electronics (ISIE), 2019, pp. 402–407

Hierarchical model predictive speed and current control of an induction machine drive with moving-horizon load torque estimator

O. Wallscheid, E.F.B. Ngoumtsa, J. Böcker, in: 2019 IEEE International Electric Machines & Drives Conference (IEMDC), 2019, pp. 2188–2195

Continuous-control-set model predictive control with integrated modulator in permanent magnet synchronous motor applications

S. Hanke, O. Wallscheid, J. Böcker, in: 2019 IEEE International Electric Machines & Drives Conference (IEMDC), 2019, pp. 2210–2216

Improved Fusion of Permanent Magnet Temperature Estimation Techniques for Synchronous Motors Using a Kalman Filter

D.E.E. Gaona, O. Wallscheid, J. Böcker, IEEE Transactions on Industrial Electronics (2019)

2018

Energy Management for a Nano-CHP Unit and an Electrical Storage System in a Residential Application

D. Weber, K.S.C. Stille, O. Wallscheid, J. Böcker, in: 2018 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), IEEE, 2018

DOI

Lifetime Extension of Photovoltaic Modules by Influencing the Module Temperature Using Phase Change Material

D. Weber, M.I. Rafsan Jani, M. Grabo, O. Wallscheid, T. Klaus, S. Krauter, J. Böcker, in: World Conference on Photovoltaic Energy Conversion (WCPEC-7), 45th IEEE PVSC, 28th PVSEC, 34th EU PVSEC., 2018

DOI

Improving torque and speed estimation accuracy by conjoint parameter identification and unscented Kalman filter design for induction machines

O. Wallscheid, M. Schenke, J. Böcker, in: 2018 21st International Conference on Electrical Machines and Systems (ICEMS), 2018, pp. 1181–1186

A combined approach to identify induction machine parameters and to design an extended kalman filter for speed and torque estimation

O. Wallscheid, M. Schenke, J. Böcker, in: 2018 IEEE 18th International Power Electronics and Motion Control Conference (PEMC), 2018, pp. 793–799

Koopman Operator-Based Finite-Control-Set Model Predictive Control for Electrical Drives

S. Hanke, S. Peitz, O. Wallscheid, S. Klus, J. Böcker, M. Dellnitz, arXiv preprint arXiv:1804.00854 (2018)

2017

Investigation of long short-term memory networks to temperature prediction for permanent magnet synchronous motors

O. Wallscheid, W. Kirchgässner, J. Böcker, in: 2017 International Joint Conference on Neural Networks (IJCNN), 2017

DOI

Glocal identification methods for low-order lumped parameter thermal networks used in permanent magnet synchronous motors

D. Gaona, O. Wallscheid, J. Böcker, in: 2017 IEEE 12th International Conference on Power Electronics and Drive Systems (PEDS), 2017, pp. 1–126

Sensitivity analysis of a permanent magnet temperature observer for PM synchronous machines using the monte carlo method

D. Gaona, O. Wallscheid, J. Böcker, in: 2017 IEEE 12th International Conference on Power Electronics and Drive Systems (PEDS), 2017, pp. 599–606

A direct model predictive torque control approach to meet torque and loss objectives simultaneously in permanent magnet synchronous motor applications

S. Hanke, O. Wallscheid, J. Böcker, in: 2017 IEEE International Symposium on Predictive Control of Electrical Drives and Power Electronics (PRECEDE), 2017, pp. 101–106

Observing the Permanent Magnet Temperature of Synchronous Motors Based on Electrical Fundamental Wave Model Quantities

O. Wallscheid, A. Specht, J. Böcker, IEEE Transactions on Industrial Electronics (2017), 64(5), pp. 3921–3929

Fusion of a lumped-parameter thermal network and speed-dependent flux observer for PM temperature estimation in synchronous machines

D. Gaona, O. Wallscheid, J. Böcker, in: 2017 IEEE Southern Power Electronics Conference (SPEC), 2017, pp. 1–6

Fusion of direct and indirect temperature estimation techniques for permanent magnet synchronous motors

O. Wallscheid, J. Böcker, in: 2017 IEEE International Electric Machines and Drives Conference (IEMDC), 2017, pp. 1–8

Derating of automotive drive systems using model predictive control

O. Wallscheid, J. Böcker, in: 2017 IEEE International Symposium on Predictive Control of Electrical Drives and Power Electronics (PRECEDE), 2017, pp. 31–36

Prediction of residual power peaks in industrial microgrids using artificial neural networks

T. Vogt, D. Weber, O. Wallscheid, J. Böcker, in: International Joint Conference on Neural Networks (IJCNN), 2017, pp. 3228–3235

Ein Beitrag zur thermischen Ausnutzung permanenterregter Synchronmotoren in automobilen Traktionsanwendungen

O. Wallscheid, Shaker Verlag, 2017

Abstract

Essentielle Anforderungen an Antriebssysteme für (teil-)elektrisch angetriebene Fahrzeuge sind eine hohe Leistungs- und Drehmomentdichte. Hierbei determinieren insbesondere die zulässigen Temperaturen wichtiger Motorkomponenten das transient sowie dauerhaft erzielbare Leistungspotential. Für die in automobilen Anwendungen häufig eingesetzten permanenterregten Synchronmotoren ist die Temperaturverteilung innerhalb der Wicklung und der Permanentmagnete von besonderem Interesse. Um den thermischen Bauteilschutz zu gewährleisten, werden Motoren in der industriellen Praxis häufig überdimensioniert, was zusätzlichen Gewichts- und Bauraumbedarf sowie höhere Produktionskosten bedingt. Alternativ kann ein Derating eingesetzt werden, welches die zulässige Motorleistung in Abhängigkeit des thermischen Zustands regelt. Dies erlaubt, sowohl die thermischen Kapazitäten des Motors gezielt auszunutzen als auch die Leistungsaufnahme im thermisch stationären Betrieb zu maximieren. Substantielle Voraussetzung hierfür ist die Kenntnis wichtiger Temperaturen zur Laufzeit - eine vollständige messtechnische Erfassung dieser ist allerdings aus Kosten- und Ausfallsicherheitsgründen nicht möglich. Im Zuge dieser Arbeit wurden daher sowohl thermische Netzwerke mit konzentrierten Parametern als auch Beobachteransätze auf Basis des elektrischen Motormodells untersucht. Darauf aufbauend wurde eine virtuelle Sensorfusion mittels Kalman-Filter realisiert. Umfangreiche Kreuz-Validierungen belegen eine hochgenaue, echtzeitfähige Temperaturermittlung mit einer Schätzabweichung von kleiner 5 K. Abschließend wurde ein modellprädiktives Derating-Konzept erarbeitet, welches sowohl die maximale thermische Ausnutzung des Antriebs erlaubt als auch definierte Grenztemperaturen sicher einhält.

2016

A Critical Review of Techniques to Determine the Magnet Temperature of Permanent Magnet Synchronous Motors under Real-time Conditions

O. Wallscheid, T. Huber, W. Peters, J. Böcker, EPE Journal (2016)(25), pp. 1–10

Real-time capable model predictive control of permanent magnet synchronous motors using particle swarm optimisation

O. Wallscheid, U. Ammann, J. Böcker, in: PCIM Europe 2016; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, 2016, pp. 1–8

2015

Global Identification of a Low-Order Lumped-Parameter Thermal Network for Permanent Magnet Synchronous Motors

O. Wallscheid, J. Böcker, IEEE Transactions on Energy Conversion (2015), 31(1), pp. 354–365

An open-loop operation strategy for induction motors considering iron losses and saturation effects in automotive applications

O. Wallscheid, M. Meyer, J. Böcker, in: 2015 IEEE 11th International Conference on Power Electronics and Drive Systems, 2015, pp. 981–985

Design and Identification of a Lumped-Parameter Thermal Network for Permanent Magnet Synchronous Motors Based on Heat Transfer Theory and Particle Swarm Optimisation

O. Wallscheid, J. Böcker, in: European Conference on Power Electronics and Applications (EPE), 2015

Design and Empirical Identification of a Lumped Parameter Thermal Network for Permanent Magnet Synchronous Motors with Physically Motivated Constraints

O. Wallscheid, J. Böcker, in: IEEE International Electric Machines and Drives Conference (IEMDC), 2015

Optimum Efficiency Control of Interior Permanent Magnet Synchronous Motors in Drive Trains of Electric and Hybrid Vehicles

W. Peters, O. Wallscheid, J. Böcker, in: European Conference on Power Electronics and Applications (EPE), 2015

2014

Real-time capable methods to determine the magnet temperature of permanent magnet synchronous motors—A review

O. Wallscheid, T. Huber, W. Peters, J. Böcker, in: IECON 2014-40th Annual Conference of the IEEE Industrial Electronics Society, 2014, pp. 811–818

Determination of rotor temperature for an interior permanent magnet synchronous machine using a precise flux observer

A. Specht, O. Wallscheid, J. Böcker, in: 2014 International Power Electronics Conference (IPEC-Hiroshima 2014-ECCE ASIA), 2014, pp. 1501–1507

2013

Wirkungsgradoptimale Arbeitspunktsteuerung für einen permanenterregten Synchronmotor mit vergrabenen Magneten unter Berücksichtigung von Temperatureinflüssen

O. Wallscheid, J. Böcker, in: ETG-Fachbericht-Internationaler ETG-Kongress 2013–Energieversorgung auf dem Weg nach 2050, 2013

Discrete-time model of an IPMSM based on variational integrators

A. Specht, S. Ober-Blöbaum, O. Wallscheid, C. Romaus, J. Böcker, in: Electric Machines & Drives Conference (IEMDC), 2013 IEEE International, 2013, pp. 1411–1417

2012

A precise open-loop torque control for an interior permanent magnet synchronous motor (IPMSM) considering iron losses

W. Peters, O. Wallscheid, J. Böcker, in: IECON 2012-38th Annual Conference on IEEE Industrial Electronics Society, 2012, pp. 2877–2882

2011

Optimierte Regelung für mobile Elektromotoren

O. Wallscheid, W. Peters, J. Böcker, Aktuelle Technik (2011), 5(1), pp. 30–33

Current controller with defined dynamic behavior for an interior permanent magnet synchronous motor

W. Peters, O. Wallscheid, J. Böcker, in: IECON 2011-37th Annual Conference of the IEEE Industrial Electronics Society, 2011, pp. 534–538

Liste im Research Information System öffnen